|
|
Post by AJRobotics on Feb 12, 2005 22:26:48 GMT
Name: Disco 5
Shape: Low Wedge with small rear wedge
Motivation: it now uses four storm 2 style Vulcalon wheels
Speed: 12.5 Mph
Weight: 100kg
Height: 300mm to top of body, 600mm to the top of the disc
Length: 1300mm
Width: 600mm
Weapon: 500mm Vert. flywheel @ 3000rpm. Has a 4.00 second spin up time due to the C40-500 Magmotor on 36v with a 2:1 twin tension cog belt reduction. The flywheel produces 31.5Kj’s at maximum RPM but is lethal at around 1 second. The second weapon is also the srimech, this weapon is a low pressure pneumatic flipper running on 10Bar (145psi) running into a single 80mm bore ram. This produces 509kg at the ram and is then transferred into the flipper with a leverage point ratio of 1:1. This is a forward facing flipper like FireStorm and will have no problem toppling the heaviest of robots.
Chassis: 4mm Grade 5 Titanium monocoque with extra 5mm Titanium ribs to give it more rigidity.
Drive: 2 x S28-400 Magmotors @ 36v with a 10:1 Mod 2 spur gear reduction
Batteries: 90 x 3000mAh NiCD cells producing 36v @ 9amp
Color- the robot and skirts and flipper are blue and the disc is yellow
Clearance- it has 0mm at the front due to the wedge it has 0mm at the sides due to skirts its 6mm with out it also has a 0mm at the rear due to the small wedge which is there to replace the problem of the skirt being flipped into the disc. The skirts are NOT hinged and held down by torsion-springs so they shouldn’t spring up and the rear one shouldn’t go up into the disc
Notes- The flywheel is at the back off the robot it goes over the back of the wedge so if I can get a robot up the wedge far enough it will be hit by the disc. The skirts stop the robot landing on its side.
Achievements- as disco, 3rd seed in ajwars and undethed challenge belt holder in ajwars extreme 1-4 ajwars 3 8th seed, as disco 4, semi finalist of the lord of the ring tourney, WINNER OF THE LORD OF THE RING TOURNEY
|
|
|
|
Post by AJRobotics on Feb 19, 2005 11:59:08 GMT
NAME- King 25 (previously 25’s revenge)
SHAPE- Invertible disc like in the rw’games or gyrobot
COLOUR- The robot is yellow and the bars are grey with black tipped ends
WEIGHT- 120kg
DIMENSIONS- 80cm diameter X 30cm (with out the bars)
SPEED- 8mph
TURNING CIRCLE- 0mm
GROUND CLEARANCE- 6mm both ways up
ARMOUR- the armour of the shell isn’t much as nothing can get to it because of the weapon so it is, the armour is 3mm aluminium, the bars are made from titanium, the tips are tipped with tungsten
MOVEMENT – The robot is a shuffler which works both ways up
POWER- 2 x S28 Magmotors on 24v.
WEAPONS- Ok its has two interchangeable weapons the first is based on son of whyachi but not quite like it. The robot has the 3 triangle spinning bars like SoW but they are attached to the centre outer rim of the robot, the other is a sort of tornado like anti crusher cage but it is circular and runs on the floor its designed for robots with skirts and other stuff but I will explain better later, it is hinged so if flipped works both ways up (please say if this doesn’t make sense) the weapon spins round at around 3500rpm this is designed to make a robot like SoW that cant be flipped over and immobilized the spinning outer shell is powered by 2 B42-500 Magmotors at 36volts, the bars/ skirts stick out around 1 meter which should prevent most robots from hitting the body.
NOTES- all components are shock mounted with rubber to survive its own blows and pushy bots.
STRENGTHS- Invertible, has powerful weapon, the top and bottom both ways can’t be hit by axes or crushers due to the bars, may not fit in a pit
WEAKNESSES- easy to push if weapon isn’t spinning
|
|
|
|
Post by AJRobotics on Feb 19, 2005 13:22:13 GMT
Name-Forklift 2
SHAPE- Low box with rear anti self flipping wedge
COLOUR- Yellowy orange
WEIGHT- 100kg
SPEED- 18mph
TURNING CIRCLE- 0m
GROUND CLEARANCE- 0mm at front due to flipper, 0mm at sides due to skirts 7mm with out, 0mm at rear due to wedge. The skirts are held down by torsion springs
ARMOUR- 3mm hardox
WHEELS- has 6 inner storm 2 style wheels
POWER- 2 x S28 Magmotors on 24v.
WEAPONS- it now uses a flipping arm that works much like the matadors or Toro’s the flipper is powered by co2 on a 120mm pneumatic ram, working at 145psi, the flipper front is pretty unique as its front is like that of a fork lift (it has 2 flat bits of metal) this is welded onto the flipper, the arm can toss robots very high and if possible out of the arena. The prongs of the forklift weapon are used to get under the corners or gaps of skirts
SRIMECH- the flipper self rights the robot but because of the rear wedge thing it self rights like firestorm does i.e. the front wheels will go down first
NOTES- this is a modified version of my robot from the panic attack forum.
STRENGTHS- Power full weapon
WEAKNESSES- limited co2
|
|
|
|
Post by AJRobotics on Feb 19, 2005 13:23:00 GMT
NAME- SRIMECH NOT INCLUDED (previously 80kg bot tartan terror)
SHAPE- like beta
COLOR- Clear
WEIGHT- 110kg
SPEED- 15mph
TURNING CIRCLE- 0mm
GROUND CLEARANCE- 0mm under all 4 wedges/ skirts 6mm under the robot so it can still move. The skirt, bottoms of wedges are made from 3.5mm hardox, the skirts are like that of biohazard
ARMOUR- 25mm GE LexGard (same as beta)
MOVEMENT- it has 2 inner tracks
POWER- 2x LEM130 Lynch Motors on 24v
WEAPONS- none it jus uses the 4 wedges and pure ramming force
SRIMECH- is not included
NOTES- Semi finalist as tartan terror in SEKT
STRENGTHS- very low to the ground, powerful drive
WEAKNESSES- SRIMECH NOT INCLUDED
|
|
|
|
Post by AJRobotics on Feb 19, 2005 13:23:36 GMT
NAME- The deer (was crusher chaos)
SHAPE- Invertible box
COLOR- the robot and claws are a dark green color
WEIGHT- 100kg
DIMENSIONS- 1m x 80cm x 25cm (l,w,h)
SPEED- 15mph
TURNING CIRCLE- 0mm
GROUND CLEARANCE- It has 6mm at the front due to the claws and has 0mm at the sides and rear without skirts 6mm. The skirts also work both ways up.
ARMOUR- 3.6mm hardox
MOVEMENT- 4 inner wheels that make the robot invertible
POWER- 2 x S28 Magmotors on 24v.
WEAPONS- it has a front pair of horizontal hydraulic crushing claws set up like deers antlers like you fine in extreme destruction. The claws have 3.5 tones of crushing force on the front tips of the claws at the middle is 6tones and right at the back it has 8 tones of crush. The claws are powered by hydraulics through a 120mm bore rams at 3000psi
NOTES- invertible, wide base means I wont topple while the deer is crushing
STRENGTHS- Very powerful weapon
WEAKNESSES- it could be turned into venison
|
|
|
|
Post by AJRobotics on Feb 19, 2005 13:24:05 GMT
Name- Panicking (previously panic 3 GTI 2)
SHAPE- Low invertible box
COLOUR- Yellow except for the lifting forks which are black
WEIGHT- 98kg
DIMENSIONS- 65cm x 60cm x 15cm (Length x Width x Height)
SPEED- 23mph
TURNING CIRCLE- 0 mm
GROUND CLEARANCE- 0 mm at front due to forks, 0 mm at sides and rear due to skirts 5 mm with out, the skirts are hinged so flop over when the robot is flipped
ARMOUR- 12mm polycarbonate
MOVEMENT- panic now uses 6 Vulcalon wheels to give extra pushing power
POWER- 2 x LEM130’s on 36 volts
WEAPONS- on the front the robot has a pair of invertible lifting forks, the forks are like those on panic attack, the forks are powered by 2 linear actuators
STRENGTHS- Low ground clearance, reliable weapon
WEAKNESSES- previously lost to spinners
|
|
|
|
Post by AJRobotics on Feb 19, 2005 13:24:43 GMT
Name- Take me out (thanks to Dave for naming the robot for me)
SHAPE- Wedge
COLOUR- Dark grey
WEIGHT- 100kg
DIMENSIONS- Height: 20cm, Length: 80cm, Width: 65cm
SPEED- around 18mph
TURNING CIRCLE- 0mm
GROUND CLEARANCE- 0mm at the front due to wedge extender, 5mm at sides and rear
ARMOUR- 4mm Aluminium Boron Carbite
MOVEMENT- 4 inner vulcalon wheels, it uses a skid steer system like tornado
DRIVE– 2 LEM 130’S on 36 volts
BATTERIES- custom 3300mAh NiCad Cell 36v BotPack
WEAPONS- The robot has a 1000psi nitrogen flipper on a 80mm bore on a 100-stroke ram which should make around 3.5 tones at the ram (if I am incorrect please correct me) the nitrogen is stored in 2, 2.2kg canisters, the robot has around 25 flips in a fight, the flipper is on high pressure
STRENGTHS- Powerful weapon, good drive
WEAKNESSES- limited supply for the weapon
|
|
|
|
Post by AJRobotics on Feb 19, 2005 13:25:06 GMT
NAME- Disco tech
SHAPE- Invertible box
COLOR- silver
WEIGHT- 100kg
SPEED- 20mph
TURNING CIRCLE- 0mm
GROUND CLEARANCE- 6mm under the discs has 0mm at sides due to skirts that will work when flipped
ARMOUR- 3.6mm hardox
WHEELS- it has 6 inner wheels
POWER- Drive: 2 x S28-400 Magmotors @ 36v with a 10:1 Mod 2 spur gear reduction connected to the 6 wheels.
Batteries: 120 x 3000mAh NiCD cells producing 36v @ 9amp
WEAPONS- It has 2 spinning each spinning at 3000rpm. Has a 4.00 second spin up time due to the C40-500 Magmotor on 36v with a 2:1 twin tension cog belt reduction. The flywheels produce 31.5Kj’s at maximum RPM but is lethal at around 1 second. It has one weapon on the front and one on the back
SRIMECH- Invertible
NOTES- can spin on the spot
STRENGTHS- fast, powerful weapons, good pushing power
WEAKNESSES- easy to flip if discs aren’t spinning
|
|
